Home > Storage (NAS) / Hard Disk Drives (HDD) / USB Flash / Solid State Drive (SSD) > Plextor > Plextor S2C 256GB SSD Firmware 1.03

Plextor S2C 256GB SSD Firmware 1.03 - Overview

The Plextor S2C 256GB SSD Firmware 1.03 is packed with excitement, as it makes use of the latest technology features to deliver cutting-edge performance. This SSD drive takes your computing experience to a whole new level. Whether on your desktop, laptop or gaming device, the Plextor S2C has been optimized for speed, reliability and durability.

Features

• The Plextor S2C firmware version 1.03 comes in a sleek, lightweight and durable design.
• The Plextor S2C drives have been optimized to deliver super-fast data storage and retrieval, thanks to its SATA III interface.
• The SSD drive is compatible with a wide range of computers and gaming devices.
• It is much more durable than a traditional spinning hard drive, reducing the risk of data loss due to shocks or damage.
• The Plextor S2C firmware version 1.03 offers a read speed of up to 520MB/s and write speed of up to 480MB/s, helping to improve your computer’s performance significantly— be it during booting or any other task that requires high-speed data transfer.
• The Plextor S2C firmware version 1.03 supports LDPC (low-density parity check) technology, which minimizes the risk of data errors and boosts the drive’s reliability significantly.
• The drive is known for its energy efficiency and requires lower power compared to other drives.

Specifications

• Interface: SATA III
• Controller: Perlite
• Cache size: 256MB DDR3 DRAM
• Form Factor: 2.5-inch
• Dimensions (W × L × H): 69.85mm x 100mm x 7mm
• Weight: 60g
• TRIM Support: Yes
• S.M.A.R.T Support: Yes
• Non-Recoverable Read Error: 1 sector per 10^16 bits read

Using technologies

• LDPC (low-density parity check) - increases the drive's reliability and reduce data errors.
• 3D NAND Flash Memory - increases the drive's density and minimizes the cost of producing them.
• SATA III - facilitates super-fast data transfer and speeds up Boot-time, high-speed data transfer, and data access.

Known issues and troubleshooting

Despite being a market-leading, top-quality SSD drive, the Plextor S2C 256GB SSD Firmware 1.03 does have some known issues. For instance, some users may experience firmware malfunction after updating their Security Erase Erase Time command. To resolve such issues or other malfunctions, you may need to perform firmware updates on the Solid State Drives. Whenever you encounter problems, inform the device support team immediately, so your issues can be dealt with as soon as possible.

Driver

The Plextor S2C 256GB SSD firmware 1.03 is pre-installed with drivers and management tools, designed to make it easy to use. You can also receive up-to-date drivers and firmware on Plextor's driver download pages. In case you experience driver issues with the Plextor S2C, seek advice from technical support engineers.