Home > Storage (NAS) / Hard Disk Drives (HDD) / USB Flash / Solid State Drive (SSD) > Plextor > Plextor M9PeGN 256GB SSD Firmware 1.2
Overview
The Plextor M9PeGN 256GB SSD Firmware 1.2 is a cutting-edge solid state drive that offers exceptional performance and advanced specifications. It is aimed at gamers, content creators and power users who require high-speed storage for quick boot times, fast game load times, and swift file transfers.List of Features
Some of the major features of the Plextor M9PeGN 256GB SSD Firmware 1.2 are:- PCIe 3.0 X4 interface for fast read and write speeds
- 256GB storage capacity
- NVMe 1.3 protocol support
- Toshiba 3D TLC NAND flash technology
- Customizable RGB lighting with the Plextor EX1 External Enclosure
Specifications
Some of the technical specifications of the Plextor M9PeGN 256GB SSD Firmware 1.2 are:- Interface: PCIe Gen 3 x4, NVMe 1.3
- Capacity: 256GB
- NAND: Toshiba 3D TLC
- Sequential Read/Write Speeds: Up to 3,200 MB/s / 1,215 MB/s
- RandRead/Write 4KB IOPS: Up to 400,000 / 300,000
- Dimensions: 22 mm x 80 mm x 2.38 mm
- Weight: 8g
Using technologies
The Plextor M9PeGN 256GB SSD Firmware 1.2 utilizes advanced technologies such as:- 64 layer Toshiba 3D TLC NAND flash technology that enables fast and reliable operation.
- PCI Express Gen 3 X4 interface that delivers high transfer rates
- NVMe 1.3 protocol which maximizes and utilizes the full potential of PCIe SSDs
Known Issues with this Device and Troubleshooting
The Plextor M9PeGN 256GB SSD Firmware 1.2 has no known issues but here are some general troubleshooting tips to help you with any issues that may arise:- If your SSD's performance is lower than expected, ensure that the firmware is up to date.
- If the PC is having trouble detecting the drive, disconnect and recheck connections as an unseated drive can cause this issue.
- If you have set a BIOS password and are experiencing issues booting up from the SSD, clear CMOS to remove the password.