Plextor M9PeG 512GB SSD Firmware 1.3
The Plextor M9PeG 512GB SSD is an advanced storage solution designed for high-performance computing applications. It comes pre-installed with firmware version 1.3, which offers notable improvements in speed, reliability and compatibility compared to its predecessors. This article covers the overview, features, specifications, known issues, troubleshooting and driver information for this device.
Overview
The Plextor M9PeG 512GB SSD is a PCIe NVMe solid-state drive that is designed for users who require fast storage for demanding applications such as 3D rendering, gaming, and video production. It is based on the latest 64-layer 3D NAND flash chips, which enables it to deliver superior read and write speeds over traditional SATA-based SSDs. Additionally, the drive uses a DRAM cache to boost performance and speed up random access times.
List of Features
- 512GB storage capacity
- PCIe NVMe interface
- 64-layer 3D NAND flash technology
- Sequential read/write speeds up to 3100/2200 MB/s
- Random read/write speeds up to 400K/300K IOPS
- DRAM cache
- LDPC ECC technology
Specifications
| Manufacturer | Plextor |
|---|---|
| Model | M9PeG |
| Capacity | 512GB |
| Interface | PCIe NVMe |
| Controller | Marvell 88SS1093 |
| NAND Flash Type | 3D NAND |
| Read Speed (max) | Up to 3100 MB/s |
| Write Speed (max) | Up to 2200 MB/s |
| Random Read Speed (4KB, QD32) | Up to 400k IOPS |
| Random Write Speed (4KB, QD32) | Up to 300k IOPS |
Using Technologies
The Plextor M9PeG 512GB SSD incorporates several advanced technologies that not only improve its overall performance but also enhance its durability, reliability and write speeds.
- Embedded Architecture: The drive's architecture improves the efficiency of hardware utilization, reduces power consumption, and increases storage capacity.
- DRAM Cache: The DRAM cache of the Plextor M9PeG 512GB SSD is designed to accelerate random access performance by storing frequently used data in its cache. This improves read and write performance and reduces latency.
- LDPC Technology: The ratio error correction technology employed by the Plextor M9PeG ensures data accuracy and reduces noise generated during the management of data block codes.
- Virtual Buffer Technology: This feature improves sustained read and write performance and reduces write amplification for extended flash endurance.
Known Issues
The Plextor M9PeG 512GB SSD has no known issues associated with it at the time of writing this article.
Troubleshooting
If you encounter issues with the Plextor M9PeG 512GB SSD, there are several troubleshooting steps that you can try:
- Verify if the drive is properly installed on your system
- Update the device driver to the latest version
- Run diagnostic tests using the manufacturer-supplied utilities
- Check for any physical damage on the SSD or connection cables
- Contact the manufacturer's customer support desk for further assistance
Driver Information
The Plextor M9PeG SSD uses a standard NVMe driver, which is automatically installed on operating systems such as Windows 10 and above. Users can update the driver to the latest version through the Windows Update Center. Additionally, Plextor provides device drivers, firmware updates, and utility management software on their official website.