Home >
Storage (NAS) / Hard Disk Drives (HDD) / USB Flash / Solid State Drive (SSD) >
Plextor > Plextor M7VG 256GB SSD Firmware 1.01
Overview of Plextor M7VG 256GB SSD Firmware 1.01
The Plextor M7VG 256GB SSD is a high-performance solid-state drive that comes with firmware 1.01. It uses the latest technologies to deliver lightning-fast speeds and improved reliability, making it an ideal asset for the modern-day computing experience. With its impressive specs and advanced features, the M7VG SSD is a must-have device for anyone looking to significantly boost the performance of their computer.
List of Features
- 256GB of storage capacity
- Firmware version 1.01
- SATA III (6Gbps) interface
- Read speeds of up to 560MB/s
- Write speeds of up to 490MB/s
- 256-bit AES encryption
- SMART support
- TRIM support
- Low power consumption
Specifications
| Brand |
Plextor |
| Model |
M7VG |
| Capacity |
256GB |
| Interface |
SATA III (6Gbps) |
| Read Speeds |
Up to 560MB/s |
| Write Speeds |
Up to 490MB/s |
| Encryption |
256-bit AES |
| SMART Support |
Yes |
| TRIM Support |
Yes |
| Power Consumption |
0.5W (Active), 0.03W (Idle) |
Using Technologies
- 256-bit AES encryption - A powerful encryption method used to secure sensitive data on the device.
- SATA III Interface - The high-speed interface that ensures quick data transfer rates between the device and your computer.
- SMART Support - Allows you to monitor the health of the drive and identify issues that may arise.
- TRIM Support - Improves write performance over the lifetime of the drive by maintaining an efficient use of available space.
Known issues with this device, Troubleshooting
There have been no known issues with the Plextor M7VG 256GB SSD firmware 1.01 since its release. However, if you encounter any issues, here are some troubleshooting steps you can try:
- Ensure that the latest firmware and drivers for the device are installed.
- Check that the SATA III interface is enabled in the BIOS settings of your computer.
- Confirm that the device is properly connected to your system. Check the cables for any damages, and reconnect them if necessary.
- Scan the drive for errors and bad blocks using third-party software such as Crystaldisk or HD Tune.
- Contact Plextor support for further assistance if the issue persists.
Driver Information
The Plextor M7VG 256GB SSD does not require any additional drivers to be installed as it uses the standard Windows drivers for compatibility. However, it is essential to ensure that all drivers on your system, including storage drivers, are up to date to ensure proper operation of the device. Most modern operating systems come with built-in support for the Plextor M7VG SSD, but you can check the manufacturer's website for additional drivers if needed.
