Home >
Storage (NAS) / Hard Disk Drives (HDD) / USB Flash / Solid State Drive (SSD) >
Plextor > Plextor M10PGN 1TB SSD Firmware 1.04
Overview
The Plextor M10PGN 1TB SSD Firmware 1.04 is a high-performance solid-state drive (SSD) that is designed to provide exceptional speed and reliability. It features a number of advanced technologies, including 3D NAND Flash, Plextor's proprietary Marvell controller technology, and a cutting-edge firmware that helps to optimize performance and increase data reliability.
List of Features
- 1TB overall storage capacity
- 3D NAND Flash
- Marvell controller technology
- Firmware 1.04 offers high-speed reading and writing capability
- ECC algorithm ensures data reliability and stability, regardless of read or write status
- AES, TCG OPAL, Microsoft eDrive full disk encryption support
Specifications
| Capacity |
1TB |
| Interface |
Serial ATA III (6Gb/s) |
| NAND Flash |
3D NAND Flash |
| Controller |
Marvell 88SS1074 |
| Sequential Read Speed |
Up to 560 MB/s |
| Sequential Write Speed |
Up to 540 MB/s |
| Random Read (4KB) |
Up to 98,000 IOPS |
| Random Write (4KB) |
Up to 83,000 IOPS |
Using Technologies
The Plextor M10PGN 1TB SSD Firmware 1.04 utilizes several cutting-edge technologies to deliver superior speed and reliability, including:
- 3D NAND Flash: Instead of using planar NAND technology, which can limit overall storage capacity, the M10PGN uses a three-dimensional stack of memory cells to increase storage capacity and improve performance
- Marvell controller technology: This proprietary controller technology is designed to optimize data transfer rates, reduce access latency, and increase reliability by supporting advanced error correction features
- Firmware 1.04: This firmware offers advanced performance tuning features, including Dynamic Write Acceleration technology, which provides faster write speeds for more demanding workloads
Known Issues and Troubleshooting
One known issue with the Plextor M10PGN 1TB SSD firmware is that some users have reported compatibility issues with certain motherboards and system configurations. If you experience these issues, it is recommended that you update your system firmware and drivers to ensure full compatibility. Otherwise there are no reported significant issues with the device.
If you are experiencing any other issues, such as reduced performance or system instability, it is recommended that you contact the Plextor support team for assistance with troubleshooting and resolving the issue.
Driver Information
The Plextor M10PGN 1TB SSD is typically compatible with standard SATA drivers included with modern operating systems, and no additional drivers should be necessary. For advanced users or proprietary systems that may require specific drivers, these can be downloaded from the Plextor website.
