VeEX CX110+ Network Tester Firmware 5.0.92

The VeEX CX110+ Network Tester Firmware 5.0.92 is a next generation test solution designed for those who need to test, verify and troubleshoot Ethernet and fiber optic networks. With its intuitive user interface and advanced features, the CX110+ is the ideal tool for network technicians and engineers in today’s demanding Ethernet and fiber infrastructure applications.

Features

Layer 2 and Layer 3 test functionalities
10/100/1000 Base-T testing capabilities
Fiber optic testing, including singlemode and multimode support
SFP testing capabilities
Wireless 802.11a/b/g/n with direct network connections
BGP, ISIS, OSPFv2/v3, RIPng, VRRP/HSRP protocols testing support
Cross-connect and traffic generation/consumption up to full line rate
Error analyzer, RFC2544 to RFC6349 - the complete set of industry compliant RFC tests
Y.1731 Ethernet performance monitoring
Combination of Triple Play and QoS Analysis
VoIP Caller ID emulation and audio playing/monitoring capabilities
In-service test along with OAM & ITU test functionalities

Specifications

Category	Specification
Physical	Dimensions: 225mm(W) x 150mm(D) x 80mm(H) Weight: 1.5Kg Display: 7” TFT color touch screen Battery: Rechargeable Li-Polymer battery of 65Wh capacity
Power	Input: 100-240VAC 50/60Hz Power consumption: 15W typical, 25W maximum with LAN loopback Outputs: 8 copper RJ-45 ports, 2 SFP ports
Compliance and Regulatory	FCC part 15B Class A EU EMC directive compliance: EN55022: 2006+A1: 2007 PSPC compliance as per ITU-T G.8262
Ports	Copper RJ-45: 10/100/1000Base-T with PoE(PSE) Fiber optic: 1.25 GB/s, 4 Wavelength LEDs (1270-1610 nm), Integrates COP, DWDM, CWDMx min 26 dB range SFP Port: 1K to10K Series via VeEX SFP Modules
Operating Conditions	Standard Conditions: +5°C ~ +45°C, 5%-85% non-condensing Storage Conditions: -10°C ~ +60°C, up to 98% humidity, non-condensing

Technologies Used

Layer 2 and Layer 3 Test functionalities
Advanced WiFi technology supporting all modern standards
Fiber testing including OTN and Coherent technologies
Generates and analyzes BER, faults and alarms
Comes with a protocol analyzer for Gigabit Ethernet standard (JTG TP-587 specification), testing triple play and VoIP services (Frameworx/CableLabs PacketCable specifications).
Supports 10 Gigabit Ethernet Testing via LAN, Stacked VLAN test and MSP QoS

Known Issues and Troubleshooting

There are no known issues with the CX110+ at this time. However, if you are experiencing any issues, refer to the user manual for instructions on troubleshooting. If the issue persists, contact VeEX support for assistance.

Driver Information

The latest driver for VeEX CX110+ Network Tester Firmware 5.0.92 can be downloaded from the official VeEX website.

EOT; $link_path="Home+:!!!:+https://www.driverdesc.com/;Router / Wi-Fi Router / Network Switch / Wireless Access Point (WAP)+:!!!:+https://www.driverdesc.com/router-wifi-router-network-switch-wireless-access-point;VeEX+:!!!:+https://www.driverdesc.com/router-wifi-router-network-switch-wireless-access-point/veex;VeEX CX110+ Network Tester Firmware 5.0.92+:!!!:+;"; $meta_tags="Defs.META_TAG_NAME_DESCRIPTION_SINGLE_DEVICE='Description and download VeEX CX110+ Network Tester Firmware 5.0.92 - Router / Wi-Fi Router / Network Switch / Wireless Access Point (WAP)';Defs.META_TAG_NAME_KEYWORDS_SINGLE_DEVICE='VeEX CX110+ Network Tester Firmware 5.0.92, download VeEX CX110+ Network Tester Firmware 5.0.92, decription VeEX CX110+ Network Tester Firmware 5.0.92, VeEX CX110+ Network Tester Firmware 5.0.92 download for free, VeEX CX110+ Network Tester Firmware 5.0.92 free download, CX110+ Network Tester Firmware 5.0.92, Router / Wi-Fi Router / Network Switch / Wireless Access Point (WAP) update, VeEX CX110+ Network Tester Firmware 5.0.92 update, CX110+ Network Tester Firmware 5.0.92, Router / Wi-Fi Router / Network Switch / Wireless Access Point (WAP), VeEX';"; require("/opt/website_gen/htdocs/include/selector.php"); ?>