Home > Router / Wi-Fi Router / Network Switch / Wireless Access Point (WAP) > AirLive > AirLive IAR-5000v2 Gateway Firmware 3.11

Overview:

The AirLive IAR-5000v2 Gateway Firmware 3.11 is a high-performance and reliable gateway device that provides seamless and efficient Internet connectivity. It offers advanced features and technologies that enhance network performance, security, and reliability, making it a perfect fit for busy offices, corporate environments, and residential users who need high-speed Internet connectivity.

List of Features:

  • Supports dual WAN ports and IPv6
  • Built-in VPN server, OpenVPN PPTP, and L2TP protocols
  • Advanced QoS policies to control the network traffic
  • Filtration facility and advanced security policy
  • Handles up to 4 SSIDs connectivity
  • High-performance hardware with 128MB DDR memory

Specifications:

  • Product Name: AirLive IAR-5000v2 Gateway Firmware 3.11
  • Brand: AirLive
  • Hardware Interface: Ethernet Gigabit, USB
  • Firewall Security: SPI, DoS protection
  • Wireless Standard: IEEE 802.11 b/g/n
  • Antenna: 3x3dBi external
  • VPN: L2TP/ PPTP
  • Processor: DM8128@1GHz
  • RAM: 128MB DDR3 memory

Using Technologies:

The AirLive IAR-5000v2 Gateway Firmware 3.11 supports the following technologies:
    I.Gateway Protocol:
  • DNS relay
  • UPnP
  • PPPoE
  • IPv6/IPv4 dual protocol stack
  • Dynamic DNS
  • NAT
    II.Wireless Standards:
  • IEEE 802.11b/g/n
  • Wireless 802.1x, WEP, WPA, WPA2, WPA-PSK, and WPA2-PSK
  • Wireless 802.11e QoS
  • Multiple SSID support up to 4 SSIDs

Known Issues and Troubleshooting:

  • The firmware may become unstable and defaults to the original configuration under some circumstances
  • Internet/ VPN connectivity issues may arise due to congestion and software incompatibility issues
  • The device may not support third-party wireless products due to vendor lock
  • Troubleshooting process for AirLive IAR-5000v2 Gateway Firmware 3.11 can be found on the manufacturer's website or support forums

AirLive IAR-5000v2 Gateway Firmware 3.11 Driver:

The AirLive IAR-5000v2 Gateway Firmware 3.11 driver can be downloaded from the manufacturer's website or can be searched from the firmware settings page of the device. The instructions for installing the driver can also be found on the same website. It's important to keep up with the latest device firmware updates to ensure that the device runs smoothly and in peak condition.