The TRENDnet TV-IP344PI v1.1R is a high-resolution network camera with a firmware of 1.2.25. It is ideal for monitoring your home, business, or any other outdoor location. The device delivers high-quality images and videos at any time, both day and night.

Features

• Powerful 4-megapixel sensor for maximum clarity and detail
• Record 2688 x 1520 pixel video at 20 frames per second (fps) both day and night
• Up to 30-meter (100-foot) ultra-illumination night vision, for clearer, brighter longer distance night surveillance
• Adjustable manual pan/tilt with auto-pan/auto-patrol movements
• Advanced video codec delivers smooth streaming video
• Power over Ethernet (PoE) compatible, so you can install the device regardless of electrical cabling
• Weatherproof IP67 rated housing ensure continuous operation even in harsh seasons & climates.

Specifications

• Sensor: 1/3" 4 Megapixel progressive scan CMOS
• Lens f: 2.8 mm fixed, F2.0 with IR Cut Filter
• Viewing Angle: Horizontal: 99.20° (typical), Vertical: 52.22°(typical), Diagonal: 114.289° (typical)
• Up to 25 feet of IR illumination distance, depending on environment
• Outdoor Rated Weatherproof IP67
• T2 Sensor allows 4 connections ("Triple Streaming" Methodology)
• Maximum Power Consumption: 10.4 Watts with PoE, 5.8W with power adapter (optional)
• Dimensions: 90 x 75 x 145mm (3.5 x 3.0 x 5.7 inches)

Technologies Used

• Compression: H.265+, H.265, H.264+, H.264, MJPEG. Implementations Simplified Streaming Profile (SSP),Motion detection, Tamper detection
• Protocols: IPv4 or IPv6, TCP/IP, RTSP, http, UPnP, DNS,DDNS, PPPoE, SMTP, ICMP, dhcp, ftp, Samba, iSCSI.

Known Issues

The network camera may have the following known issues:

1. The video may suffer from lag and distortion when accessed via an unstable/unreliable network connection
2. Occasional difficulty finding the device on some network configurations because of incompatibility with certain routers/firewalls.

Troubleshooting

If you encounter issues with the TRENDnet TV-IP344PI v1.1R network camera, try the following troubleshooting steps:

1. Ensure that the device is properly connected to a power source and the network.
2. Check if the router firewall permits access to the network camera.
3. Ensure that you are using a supported web browser and codecs for streaming videos.
4. Update the firmware for better performance

Driver

The TRENDnet TV-IP344PI v1.1R network camera requires no separate driver for installation of Firmware 1.2.25. Currently no drivers are available for the device running for operating system. With installation of Firmware 1.2.25 mentioned you can access the camera through web interface. All other settings can be established on network camera web interface from computer web browser.