The ASIX AX88772 USB to Ethernet adapter makes it possible for laptops and tablets without built-in Ethernet ports to have a reliable, high-speed network connection via USB port. This device is commonly used by people who need to connect their computer to a wired network when Wi-Fi may not be available or when a wired connection is just preferred.

Features:

• USB 2.0 interface compatible with the latest USB specifications.
• Compatible with IEEE 802.3/802.3u standards, supports Full Duplex flow control and Half Duplex back pressure Flow Control.
• 10/100M data rates with auto-negotiation and auto-MDI/MDIX.
• Supports ACPI, PCI power management, and remote wake-up.
• Low power consumption in idle mode and low traffic conditions.

Specifications:

• Brand: ASIX
• Model: AX88772
• Interface: USB 2.0
• Connector Type: RJ45 Ethernet Jack
• Network Protocol: IEEE 802.3 / 802.3u NOT FOR 802.3x (FULL DUPLEX)
• Data Transfer Rate: 10Mbps/100Mbps Half/Full Duplex
• Cable Length: 8.2" (21cm)
• Dimension: 2.36 x 1.22 x 0.59 inchs (6.0 x 3.1 x 1.5 cm)
• Weight: 0.48 oz (13.54 g)
• Supported OS: Windows 8 64-bit

Known Issues and Troubleshooting:

Some users may experience compatibility issues or connection problems with their AX88772 adapter. Here are some troubleshooting tips to try:

• Disconnect the adapter and reconnect to the PC
• Ensure that the driver for the device is installed properly
• Try a different USB port on the computer
• Ensure that the Ethernet cable is properly connected and the network cable is working
• Check the device manager of your computer to see if the adapter is properly configured and drivers are installed
• Consider checking for updated drivers from the manufacturer website

Driver Information:

The ASIX AX88772 adapter requires a driver to function properly. The current driver version available for Windows 8 64-bit systems is 3.16.3.0.

To update or reinstall the driver, you can follow these steps:

1. Download the updated driver from the ASIX website or other reputable source.
2. Unzip the driver files to a folder on your computer.
3. Connect the ASIX AX88772 adapter to the USB port on your computer.
4. Open Device Manager and locate the ASIX AX88772 adapter in the Network Adapters section.
5. Right-click the adapter and select Properties.
6. Click the Driver tab and then click Update Driver.
7. Select "Browse my computer for driver software" and choose the folder where the unzipped driver files are located.
8. Follow the prompts to install the driver.