The ASIX AX88178A USB 2.0 to LAN Driver 1.12.10.0 is a driver that enables seamless communication between a computer and an Ethernet device over a USB 2.0 interface. The ASIX AX88178A USB 2.0 to LAN controller is a high-performance and cost-effective USB 2.0 to the Gigabit Ethernet adapter that allows you to easily connect to a network from a USB-enabled computing device. Unlike a typical USB to Ethernet adapter, the ASIX AX88178A boasts Gigabit Ethernet speeds, which means that it is capable of delivering high network bandwidths required for today's demanding multimedia applications.

List of Features

• Compliant with USB 2.0 Full-Speed (12Mbps) Specification.
• Miniature Design.
• Supports IPv4/IPv6 protocol.
• Supports Windows XP/Vista/7/8/8.1, Server 2008/2008 R2/2012, Linux Kernel 2.6.34~5.0 and Mac OS X 10.6~10.14.x operating systems.
• Supports checksum (IP, TCP, UDP) offload.
• Suggests the I/O mapping scheme on the EEPROM.
• Supports Wake-on-LAN.

Specifications

• Name: ASIX AX88178A USB 2.0 to LAN Driver
• Driver Version: 1.12.10.0
• Operating System: Windows 7 (32-bit and 64-bit)
• Size: 57.9 MB

Using Technologies

The ASIX AX88178A USB 2.0 to LAN driver supports a range of advanced technologies that deliver high-speed network connectivity and ensuring reliable transmission of the data. For instance:

• Checksum offload – increases throughput performance and reduces CPU utilization by offloading checksum calculation flow onto the adapter hardware.
• Wake-on-LAN – This feature lets your computer power up the LAN adapter by using a network message from a remote local area network.
• IPv4 and IPv6 protocol – Widely adopted protocol suite that use for seamlessly communication with the target device.

Known Issues with ASIX AX88178A USB 2.0 to LAN device and troubleshooting

While the driver enables the device to function flawlessly in most cases, there are some limitations that affect its performance. The known issues include:

• Occationally unstable in some versions of Windows.
• The device may cause the computer to restart or crash under high intensity network traffic or while performing large data transfers over the Ethernet device.

In case you encounter any issue with the device or the driver, the ideal troubleshooting method depends on the nature of the problem. Nevertheless, following guide can be helpful:

• Try disconnecting the device and then reconnecting it - this often resolves most issues associated with driver malfunction or installation problems.
• Make sure that you have installed the correct driver version that is compatible with the relevant operating system version.
• In Windows Control Panel go to Device Manager and check whether if there is any issue detected related driver, network card or its conflict with a driver in System Drivers.
• Contacting with Peripheral specialists or Technical support on the problem that you are facing for proper resolution of the issue.
• Updating the device firmare and/or the driver software that can solve any compatibility and stability issues.

ASIX AX88178A USB 2.0 to LAN Driver

The ASIX AX88178A USB 2.0 to LAN Driver 1.12.10.0 for Windows 7 is the driver software allows seamless communication between a computer and an Ethernet device over a USB 2.0 interface. The correct installation of this driver is essential for the device to function optimally. Therefore, it is essential to download the software from the right source.

• The driver can be downloaded from the established vendor’s websites such as ASIX technology website or third-party driver download sources.
• A quick internet searching can be helpful finding legitimate and latest driver version.

The driver file is delivered in an executable format with an easy installation wizard. Once downloaded and double-clicked the file. Follow The installation instruction performed through the installation wizard proceed then accept the license/ terms and conditions to complete the installation process.