The VIA CX700/VX700 RAID Controller is a peripheral device designed to facilitate connecting multiple storage drives and increase the data reading and writing speed devising RAID setup on Windows operating systems. This device is manufactured by VIA Technologies, INC.

Features:

• Supporting multiple RAID configurations
• Supporting NCQ, Native Command Queuing, and SATA 3.0 interface speeds
• Operates seamlessly with VIA CX700/VX700 chipset-enable motherboards
• User-Friendly configuration interface

Specifications:

The VIA CX700/VX700 RAID controller supports RAID types 0, 1, and JBOD. RAID 0 combines two disks to allow for extending the read/write speed while further distributing the data between them. On the other hand, RAID 1 writes the same data on both drives, which acts as identical sets of data. The dock in device should be SATA Rev 2.0 to provide the standard data transfer speed of 3 GB/s. As well, if the motherboard is installed with VIA CX700/VX700 chipset it can operate flawlessly when installed.

Known issues:

Some issues were reported in older versions of drivers when installing the devices with the Windows 8 operating system running.

Troubleshooting:

The simplest way for troubleshooting the problem is to switch to a new release version of the driver software. As well ensure the network is working well without other disturbances when attempting to get the drivers from a reputable source. In situations experiencing problem health hardware address checking, disable any flame walls or antivirus that maybe rule.

About VIA CX700/VX700 RAID Controller Driver 7.0.9600.6352 for Windows 8 64-bit:

The VIA CX700/VX700 RAID Controller Driver for Windows 8 64-bit basic functionality since storage systems are essential complements of its vast technological devices chains.