Home > Motherboard / Mainboard > Silicon Image > Rosewill RC-219 PCI-E SATA II Card Silicon Image RAID Driver 1.0.15.0 64-bit

Overview:

The Rosewill RC-219 is a PCI-E SATA II card with a built-in RAID function. The card is equipped with a Silicon Image controller chip that allows for seamless data transfer for multiple hard drives. RAID stands for Redundant Array of Inexpensive Disks, and it provides data redundancy, automatic data recovery and faster data access speeds. The card is capable of supporting up to four SATA devices, making it an excellent choice for users who require additional storage for their PC.

List of Features:

• Plug and Play installation
• Supports RAID modes: RAID 0, 1, 5, 10
• Supports SATA II transfer rates up to 3Gb/s
• Supports up to four SATA devices
• Compatible with Windows XP, Vista, 7 and 8

Specifications:

• Brand: Rosewill
• Model: RC-219
• Chipset: Silicon Image 3132
• Interface: PCI Express x1
• SATA ports: 4
• Transfer rates: SATA II 3Gb/s

Using Technologies:

The Rosewill RC-219 uses PCI Express x1 technology to communicate with the computer's motherboard. The controller chip used is the Silicon Image 3132, which allows for SATA II transfer rates up to 3Gb/s. The card supports up to four SATA devices with RAID modes: RAID 0, 1, 5, 10.

Known Issues and Troubleshooting:

One known issue with the RC-219 is that there have been reports of compatibility issues with some motherboards. The card may not function properly or not be recognized by the computer at all. If this occurs, try installing the card in a different PCIe slot. If the problem persists, try updating the BIOS on your motherboard or check for any firmware updates for the card. If you are having difficulty installing the driver for the card, verify that you have downloaded the correct driver for your operating system. The driver for the Rosewill RC-219 is the Silicon Image RAID Driver 1.0.15.0 64-bit. Once downloaded, run the installer and follow the on-screen instructions. If the driver fails to install, try restarting your computer and attempting the installation again. If the issue persists, contact Rosewill Technical Support for assistance.

Driver:

The driver for the Rosewill RC-219 is the Silicon Image RAID Driver 1.0.15.0 64-bit. This driver is compatible with Windows XP, Vista, 7, and 8 operating systems. The driver can be found on the Rosewill website or on our driver download platform. Once downloaded, run the installer and follow the on-screen instructions to complete the installation.